Model | LSM3503-300 LSM3503-500 |
Optional engine | Kubota 43.3kW/2700rmp Kubota 67.6kW/2400rmp Cummins 59kW/2500rmp Cummins 81kW/2500rmp |
Air compressor | 1200–2400 L/min,at 8 bar,screw type air compressor |
Paint tank capacity | 300L(600KG) 500L(1000KG) |
Burner type | Beckett burner (USA), circulating heating with heat transfer oil,automatic temp.control |
Hydraulic system | DANFOSS ( Denmark ) |
Hydraulic oil tank | 168L 218L |
Fuel tank | 84L 138L |
Glass bead tank capacity | 200L pressurized tank |
Spray guns | With 1pcs spray gun With 2pcs spray guns |
Line width | 10 - 20 cm 10 - 40 cm |
Travel speed | 0-22km/h |
Climbing ability | 13° |
Turning radius | 3.2M |
Dimensions (LWH) | 6350×2250×2650mm 6630×2250×2650mm |
Net weight | 3700kg 4800kg |
Model | LSM3502-300 LSM3502-500 |
Optional Engine | Kubota 43.3kW/2700rmp Kubota 67.6kW/2400rmp Cummins 59kW/2500rmp Cummins 81kW/2500rmp |
Air compressor | 1200–1800 L/min , at 8 bar , piston type air compressor |
Hydraulic system | DANFOSS ( Denmark ) |
Hydraulic oil tank | 168L 218L |
Fuel tank | 84L 138L |
Travel speed | 0-22km/h |
Climbing ability | 13° |
Heating method | Beckett diesel burner(USA), thermal oil circulation insulation, automatic temperature control |
Paint tank capacity | 300L (600kg) 500L (1000kg) |
Glass bead tank | 200L pressurized tank |
Line width | Standard 30cm, each 5cm section constitutes one control unit, totaling 6 control units. 30,40,45, 50cm. Each 5cm on the extruder constitutes one control unit. |
Marking mode | Flat lines, checkerboard lines, staircase lines, piano lines, and other pre-programmed markings |
Marking setting | Select the line mode on the computer panel and set the marking parameters |
Construction efficiency | 300 m²/h 450 m²/h |
Dimension (LWH) |
5700 × 2200 × 2750 mm（Cummins） |
Net weight | 3954 kg 4800 kg |
Model | LSM3506-300 LSM3506-500 |
Optional Engine | Kubota 43.3kW/2700rmp Kubota 67.6kW/2400rmp Cummins 59kW/2500rmp Cummins 81kW/2500rmp |
Air compressor | 490L/min,at 8 bar ，piston type air compressor |
Paint tank capacity | 300L(600KG) 500L(1000KG) |
Burner type | Beckett diesel burner(USA), thermal oil circulation insulation, automatic temperature control |
Hydraulic system | DANFOSS ( Denmark ) |
Glass Beads tank capacity | 200L pressurized tank |
Line width | Screed marking shoe:STD 150mm (50-500mm Optional) |
Travel speed | 0-22km/h |
Climbing ability | 13° |
Efficiency | 200㎡/h |
Line type | Flat line convex line（optional） |
Dimension (LWH) | 4550×2200×2550 |
简体中文
English
