PRODUCT DETAIL
Model | LSM3503-300 LSM3503-500 |
Optional engine | Kubota 43.3kW/2700rmp Kubota 67.6kW/2400rmp Cummins 59kW/2500rmp Cummins 81kW/2500rmp |
Air compressor | 1200–2400 L/min,at 8 bar,screw type air compressor |
Paint tank capacity | 300L(600KG) 500L(1000KG) |
Burner type | Beckett burner (USA), circulating heating with heat transfer oil,automatic temp.control |
Hydraulic system | DANFOSS ( Denmark ) |
Hydraulic oil tank | 168L 218L |
Fuel tank | 84L 138L |
Glass bead tank capacity | 200L pressurized tank |
Spray guns | With 1pcs spray gun With 2pcs spray guns |
Line width | 10 - 20 cm 10 - 40 cm |
Travel speed | 0-22km/h |
Climbing ability | 13° |
Turning radius | 3.2M |
Dimensions (LWH) | 6350×2250×2650mm 6630×2250×2650mm |
Net weight | 3700kg 4800kg |
Model | LSM3502-300 LSM3502-500 |
Optional Engine | Kubota 43.3kW/2700rmp Kubota 67.6kW/2400rmp Cummins 59kW/2500rmp Cummins 81kW/2500rmp |
Air compressor | 1200–1800 L/min , at 8 bar , piston type air compressor |
Hydraulic system | DANFOSS ( Denmark ) |
Hydraulic oil tank | 168L 218L |
Fuel tank | 84L 138L |
Travel speed | 0-22km/h |
Climbing ability | 13° |
Heating method | Beckett diesel burner(USA), thermal oil circulation insulation, automatic temperature control |
Paint tank capacity | 300L (600kg) 500L (1000kg) |
Glass bead tank | 200L pressurized tank |
Line width | Standard 30cm, each 5cm section constitutes one control unit, totaling 6 control units. 30,40,45, 50cm. Each 5cm on the extruder constitutes one control unit. |
Marking mode | Flat lines, checkerboard lines, staircase lines, piano lines, and other pre-programmed markings |
Marking setting | Select the line mode on the computer panel and set the marking parameters |
Construction efficiency | 300 m²/h 450 m²/h |
Dimension (LWH) |
5700 × 2200 × 2750 mm（Cummins） |
Net weight | 3954 kg 4800 kg |
Model | LSM3506-300 LSM3506-500 |
Optional Engine | Kubota 43.3kW/2700rmp Kubota 67.6kW/2400rmp Cummins 59kW/2500rmp Cummins 81kW/2500rmp |
Air compressor | 490L/min,at 8 bar ，piston type air compressor |
Paint tank capacity | 300L(600KG) 500L(1000KG) |
Burner type | Beckett diesel burner(USA), thermal oil circulation insulation, automatic temperature control |
Hydraulic system | DANFOSS ( Denmark ) |
Glass Beads tank capacity | 200L pressurized tank |
Line width | Screed marking shoe:STD 150mm (50-500mm Optional) |
Travel speed | 0-22km/h |
Climbing ability | 13° |
Efficiency | 200㎡/h |
Line type | Flat line convex line（optional） |
Dimension (LWH) | 4550×2200×2550 |
Model | LSM2003 |
Optional Engine | Gasoline engine: HONDA GX690 ，13kW Diesel engine: KUBOTA V1505-T, 32.5kW |
Fuel tank capacity | 80L |
Air compressor | 320L/min,at 8 bar ，piston type air compressor |
Paint tank capacity | 180L (360kg), hydraulic stirring |
Heating type | LPG,direct burning,without automatic temperature control |
Hydraulic system | DANFOSS ( Denmark ) |
Hydraulic oil tank capacity | 85L |
Glass bead tank capacity | 75L pressurizedtank |
Marking shoes size | Standard: 15cm (5～50cm optional exchangeable) |
Line width | 5~50CM according to marking shoes size |
Line models | Solid line / Automatic dashed line /Convex line (Optional) |
Air Glass Beads dispenser | Standard: 1 gun, (40～50cm line should with 2 guns) |
Travel speed | 0~8km/h |
Efficiency | 150~200㎡/h |
Climbing ability | 13° |
Dimension (LWH) | 2300*1760*2300mm（Gasoline engine） / 2300*1800*2300mm（ Diesel engine） |
Net weight | 1360kg（Gasoline engine） / 1490kg （Diesel engine） |
Model | LSM2002 |
Optional Engine | Kubota V-1505T 32.5kW/3000rmp Yanmar 4TNV88C-KTY 34.3kW/2800rmp (EU StageⅤ) |
Fuel tank capacity | 94L |
Air compressor | 320L/min,at 8 bar piston type air compressor |
Paint tank capacity | 180L (360kg), hydraulic stirring |
Heating type | Beckett diesel burner(USA), thermal oil circulation insulation, automatic temperature control |
Hydraulic system | DANFOSS ( Denmark ) |
Hydraulic oil tank capacity | 150L |
Glass bead tank capacity | 110L pressurized tank |
Marking shoe size | 20cm |
Line width | 15cm / 20cm（customized） |
Line models | Solid line / Automatic dashed line |
Air glass bead dispenser | Standard: 1 gun |
Travel speed | 0~10km/h |
Efficiency | 200-250㎡/h |
Climbing ability | 13° |
Dimensions (LWH) | 2800*1850*1800mm |
Net weight | 2100kg |
Model | LSM2001 |
Engine | HONDA GX690, gasoline engine, 16.5kW,3600(r/min) |
Fuel tank capacity | 50L |
Hydraulic system | DANFOSS ( Denmark ) |
Travel speed | 0-8km/h |
Climbing ability | 15° |
Air compressor | 320L/min,at 8 bar , piston type air compressor |
Hydraulic plunger pumps | 9L/min × 2 |
Working pressure | 10-20MPa |
Spray gun | 2 automatic and 1 manual |
Spraying width | 50—600mm |
Paint tank capacity | 190L(380kg) |
Glass bead tank | 50L pressurized tank |
Glass Beads spray gun | 2pcs |
Marking mode | Cold paint marking, two-component marking(1:1) |
Marking setting | Automatic broken line,solid line |
Hydraulic oil tank capacity(for driving) | 80L (drive system) |
Hydraulic oil tank capacity(for paint pump) | 12L (hydraulic pump) |
Dimension (LWH) | 3000×1980×2300mm |
Net weight | 1100kg |
Tel：008617310815016
Fax：00861069450772
Phone：008617310815016
Email：marketing@landscapus.com
Add：No.3 Block 26,Shunyi,Beijing,China
简体中文
English
